CMCL2
In stock
Cloudlifter CL-2, 2 Ch. Mic Activator
$249.99
Bring Your Mics to Life
Cloudlifters increase the sensitivity of your microphone and bring its natural tonal characteristics into focus. The single-channel Cloudlifter CL-1, two-channel Cloudlifter CL-2, and rack-mountable four channel Cloudlifter CL-4 all provide up to +25dB of ultra-clean gain with fixed impedance loading at 3kΩ, optimized for a wide variety of microphones. Each one is designed to improve the sensitivity and performance of lower-output microphones dramatically. Whether you’re using an expensive, professional-grade microphone/preamp combination or common microphones with a basic home setup, Cloudlifters provide way more signal from the microphone itself, allowing the preamp to operate in its optimal gain range by reducing the amount of gain needed. This reduces noise and distortion, bringing more of the microphone’s natural character into focus. For those recording professionally, at home, or performing on stage, Cloudlifters are valuable tools that produce high-quality, professional audio.
Pickup is available in 1 stores
iHomiLA
821 S Los Angeles St, Los Angeles, 90014
United States
Pickup available
3
pcs
In stock
CL-2 Specs
Power
Dimensions
Input Impedance
3k Ohms
Recommended Load Impedance
>5K Ohms
Connectivity
3-pin male/female XLR connector
Powering
48V Phantom Power (P48 according to IEC 61938)
Product width
119.09 mm (4.72 in.)
Product height
40.89 mm (1.61 in.)
Product length
94 mm (3.7 in.)
Product weight
450 g (15.9 oz.)
Sound
Frequency range
5 Hz - 80 kHz (-0.3 dB)
Gain
Provides up to +25dB of Ultra-Clean Gain with 5k Load
Current consumption
3.1 mA
| In-Store Pickup | Yes |
|---|---|
| UPC | 094922484215 |
| Stock Last | 3 |
Write Your Own Review
Customers Who Bought This Item Also Bought
